FLUIDMASTER

FLUIDMASTER CONNECTOR

flexible no burst and wax video
flexible no burst and wax video

 

4F60CU Fits All No Burst Connector 1/2" 60"
4F60CU Fits All No Burst Connector 1/2″ 60″

CONNECTOR FLUIDMASTER

4F60CU Fits All No Burst Connector 1/2″ 60″

Fluidmaster Faucet water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. They also have a large inside diameter for higher flow capacity. No-Burst connector. 1 connector fits 4 shut-off valve sizes: 3/8″, 7/16″, 1/2″ Male compression and 1/2″ Male iron pipe.

  • Exceptional flexibility for fast, easy installation
  • Won’t kink or crease, even in the tightest of spaces
  • Heavy-duty brass hex nuts are easy to grip and nickel plated for durability
  • Exceeds all code requirements for flexible water connectors
  • Length : 60″
  1. Memiliki panjang mulai dari 22,5 cm sampai dengan 180 cm dan kekuatan anti pecah yang paling besar 
  2. Memiliki ukuran sambungan ke pipa 3/8″, 7/16″, 1/2″ sehingga mudah disesuaikan dengan sambungan pipa. 
  3. Pipa stainless Steel anyaman yang memiliki kelenturan yang unggul dan tidak akan terpuntir/tertekuk. 
  4. Kap ulir untuk sambungan yang rapat dan kencang serta tidak akan lepas. 
  5. Mudah pemasangannya 
  6. Jaminan 5 tahun 
4F09CU Fits All Faucet No Burst Vinyl Connector 09″
4F36CU Fits All Faucet No Burst Connector 36″
4F48CU Fits All Faucet No Burst Connector 48″
4F60CU Fits All No Burst Connector 1/2″ 60″
4F72CU Fits All Faucet No Burst Connector 72″

 

B9WM60 Washing Machine No Burst 3/4"
B9WM60 Washing Machine No Burst 3/4″

B9WM60 Washing Machine No Burst 3/4″

Protect your home with a Fluidmaster Braided Stainless Steel Flexible Washing Machine Connector. This 3/4-Inch female hose fitting by 3/4-Inch female hose fitting connector connects your washing machine to the wall water supply. Made from high quality PVC and braided in stainless steel, this connector won’t burst or leak in even the highest pressure conditions.

  • No-Burst flexible braided stainless steel for superior strength
  • Stainless-steel washing machine hoses have thread adapters fit most shut-off valve connection fittings
  • 3/4″ hose fitting x 3/4″ hose fitting
  • 60″ length
  • Carded

 

B4F12" No Burst Connector 1/2" 12"
B4F12″ No Burst Connector 1/2″ 12″

B4F12″ No Burst Connector 1/2″ 12″

1/2″ Female pipe straight threads (to fit faucet shank) on other end. Stainless steel connector with nickel-plated brass hex nuts. Stainless ferrules are extra long, with more crimps. Exceptional flexibility for fast, easy installation. Won’t kink or crease, even in the tightest of spaces. Heavy-duty brass hex nuts are easy-to-grip with fingers or tools. 10 year warranty.

Note : cocok sekali sebagai flexible untuk water heater karena sangat kuat dan tahan lama. Tahan air panas sampai dengan 110 derajat celcius dan -15 derajat celcius.

 

B4F12″ No Burst Connector 1/2″ 12″
B4F16″ No Burst Connector 1/2″ 16″
B4F20″ No Burst Connector 1/2″ 20″
B4F30″ No Burst Connector 1/2″ 30″

 

 

B4T09" - No Burst 7/8" x 1/2" 09"
B4T09″ – No Burst 7/8″ x 1/2″ 09″

B4T09″ – No Burst 7/8″ x 1/2″ 09″

The 9″ Toilet Connector comes equipped with high bursting, inner and outer strength. Each foot of NO-BURST contains 220 feet of stainless steel wire. Stainless ferrules are extra long with radial crimps for more security. Tough, NSF-approved polymer core resists chlorine and chloramines. Ample inside diameter for high flow capacity. Captive cone washers seal tightly, so they cannot fall out. Connector will not kink or crease, even in the tightest of spaces. Heavy-duty brass hex nuts are easy to grip and nickel plated for durability. Exceeds all requirements for flexible water connectors as defined by ASME A112.18.6 and CSA B125.

  • Braided Stainless Steel with Polymer Core and Heavy-Duty Nuts
  • Exceptional Flexibility for Fast, Easy Installation
  • Connector Does Not Kink or Crease
  • Carded
  • Wide Variety of Water Supply Fittings Available
  • Suitable for Water Heater
  • 110 Celcius degree to -15 Celcius degree
B4T09″ No Burst 7/8″ x 1/2″ 09″
B4T12″ No Burst 7/8″ x 1/2″ 12″
B4T16″ No Burst 7/8″ x 1/2″ 16″
B4T20″ No Burst 7/8″ x 1/2″ 20″

 

B4FV12" Reinforced Vinyl 1/2" x 1/2" 12"
B4FV12″ Reinforced Vinyl 1/2″ x 1/2″ 12″

B4FV12″ Reinforced Vinyl 1/2″ x 1/2″ 12″

  • Fluidmaster faucet water supply connectors are built to last. Made of reinforced vinyl, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts
  • Exceptional flexibility for fast, easy installation
  • Won’t kink or crease, even in the tightest of spaces
  • Heavy-duty brass hex nuts are easy to grip and nickel plated for durability
  • Exceeds all code requirements for flexible water connectors
B4FV12″ Reinforced Vinyl 1/2″ x 1/2″ 12″
B4FV16″ Reinforced Vinyl 1/2″ x 1/2″  16″
B4FV20″ Reinforced Vinyl 1/2″ x 1/2″  20″
B4FV30″ Reinforced Vinyl 1/2″ x 1/2″  30″